Using Fibre Optics for CCTV Installations | A Plus Security

Using Fibre Optics for CCTV Installations

29 June 2021

Using Fibre Optics for CCTV Installations

For many large scale CCTV installations our company preference is to propose and utilise a fibre optic network. Using fibre optics can be a contentious issue for some, mainly due to the perceived extra cost of fibre optic infrastructure, we do find that at times, that we must have a solid argument on why we like to propose on using this technology as the backbone of a large scale CCTV system. 

When we start to drill down into it, there are many reasons why using fibre optics are a better option.

Data and Distances

This is probably the most prominent reason when choosing fibre, as the picture quality can be maintained over far greater distances than copper cable will achieve. As a rule of thumb, copper CAT5 cabling is only effective up to around 90m/300ft, beyond this, the data streaming becomes unstable and in turn the image quality can become unusable. Fibre optic transmission can be extended to distances of 60km or more, making this the choice for sites where distant cameras are required on the network.



Because of the significantly improved bandwidth available with fibre optic cables, the ability to connect far more cameras is another major benefit. On systems where just one or two cameras are currently use, utilising fibre may be seen as overkill but if the system has a long term vision of scaling up to multiples of cameras in several different areas then specifying fibre optic means the user can upgrade the system at a later date to support additional cameras without the hassle and expense of upgrading the infrastructure.


Image Quality

Because the fibre optic cables support a higher bandwidth and a faster data transfer speed, pictures can achieve a significantly higher resolution than that which is possible using coaxial or copper cabling. Added to this, fibre optic is non conductive and completely immune to radio frequency and electromagnetic interference therefore the picture can be relied upon to maintain its integrity no matter what is occurring in the neighbouring environment. Added to this, the system designer will have far greater flexibility of where to lay the cables and could even lash them to telephone lines without any interference being caused.


Data security, Damage and Safety

Fibre optic cable is extremely difficult to breach, therefore is a perfect choice for organisations wishing to maintain the utmost security of their images along the line. To decode the images from the cable, the hacker would have to employ a good deal of specialist equipment and would have to be able to recognise not only the optical frequency but also the type of signal (AM/FM, digital, laser or LED) that is being transmitted.

Because all the information in the fibre optic cable is transmitted via photons, there is no risk of fire from the production of a spark, and the cables will not cause ground loops as copper cables have been known to. As previously mentioned, fibre is non conductive, so there is no risk of a lightning strike feeding back to the hub and causing fire or damage there.



Due to the make up of the cable is very little which will degrade over time, so the potential to have to renew sections of the network in the next decade are highly unlikely. Added to this, the material is resistant to damp, chemical exposure and temperature changes, so can be buried underground or used in situations where other forms of cabling would not be up to the job.



Many users and designers presume that fibre optic cabling will be more expensive, but actually if you consider the whole life costing then it can work out similar or even better than other alternatives. Faster copper cabling such as CAT6 is more expensive and is coming close in terms of purchase price to that of fibre, and fibre is becoming cheaper by the day. Over time fibre is likely to continue to reduce in price as the raw materials for its manufacture (mainly sand) are far more freely available than copper.

Added to this, a system designed with fibre is future proofed in a number of ways. As well as the ability of the user to upgrade the system to support additional cameras, the fibre is capable of far faster transmission speeds than those which are currently employed in CCTV technology. As technology moves on, fibre optic cables will be able to grow and upgrade with the system, saving the user a good deal of money and trouble when wanting to upgrade.


Interested in a CCTV system, or looking to upgrade your existing to use Fibre Optics?

Contact us here, or call our experts on 01702 293157.

What our
clients have to
say about us

A Plus provides an excellent return on investment, not just through the solution installed, but the general experience they offer from pre-install to post-install and right through to the maintenance of the system. We knew we had made the right decision with A Plus as they offered a comprehensive and detailed proposal and project plan. The skill level of their engineers was a pleasant surprise with their knowledge of IT and networks, as well as electronic security, which made dealing with our internal IT team very smooth. Apart from that, the fact we never had to chase them for anything was a very nice surprise!

International Group of Schools

A Plus Security exceeded all expectations, following a late award of the contract due to a different contractor pulling out. All fire and security works were completed when requested and signed off on finish, with no issues noted. We have continued working with A Plus on following projects and would fully recommend them.

Operations Manager of P&M Electrical